Radio Engineering Industries SD40 Manual de usuario descargar pdf (Pagina 64)

Digital BUS-WATCH

PC Software Manual

Radio Engineering Industries, Inc.

640372 - Rev D - 12/15/2010

Page 64 of 99

The DVR information needed by the Digital BUS-WATCH® surveillance system to establish a

network connection to the specified DVR must be entered into the fields of the DVR Info dialog

box. A brief description of the required fields is given below:

Name: Descriptive display name for this DVR (arbitrary)

Address: IP Address assigned to this DVR *

Port: Client port of this DVR (typically = 80) *

Video Type: Set to Rm-Mpeg4 for a R1001/R4001/R8001 Mobile DVRs

Channel: Number of channels of the target DVR:

1 channel for a R1001 Mobile DVR

4 channels for a R4001 Mobile DVR

8 channels for a R8001 Mobile DVR

I-Frame: Set this to Y on DVRs that will be connected through a cell phone tower network.

The DVR will record all video but send back only the I-Frames

Channel Name: Descriptive display name for each channel (camera) of this DVR

(Optional – can be left blank)

* Note: The values in the IP address (Addr) and port fields must match the settings of the target

DVR. Please contact your IT administrator and/or consult the DVR hardware manual for

information on DVR IP address and port settings.

To create an entry for a DVR within an existing group

 Select the desired group

 Click the Add Button located below the DVR entry pane.

 The DVR (Base) Info dialog box will appear.

 After the required information has been successfully entered

 Click OK to accept the information to create an entry for the DVR within the currently

selected group

 Cancel to discard the information and skip entry creation.

 Focus will return to the Devices tab.

A list of DVR entries within the currently selected group appears in the DVR entry pane.

To edit the DVR information for an entry

 Select the entry from the DVR entry list

1 2 ... 59 60 61 62 63 64 65 66 67 68 69 ... 98 99

Sin comentarios

Radio Engineering Industries SD40 Manual de usuario Pagina 64