Radio Engineering Industries SD40 Manual de usuario descargar pdf (Pagina 47)

Digital BUS-WATCH

PC Software Manual

Radio Engineering Industries, Inc.

640372 - Rev D - 12/15/2010

Page 47 of 99

Playback Speed Control

Speed Control Dialog Box

The playback speed during play mode can be increased or decreased using the Play Speed

Control. The control can set playback speed to 1/16, ⅛, ¼, ½, and 1 (normal), 2, 4, 8, or 16

times the speed of real-time playback.

The Play Speed Control setting affects playback speed during play mode, when video is actively

played back. The control has no affect in other modes.

Volume Control / Audio Enable Button

The Volume Control slider is used to adjust the volume of associated audio during playback. To

set the volume to minimum, move the slider bar to the far left. Moving the slider to the far right

is maximum volume. The Audio Enable Button is used to mute the audio. A red X will appear

over the control when Audio Enable is enabled.

Chart

BUS-WATCH® Video Info Analysis is used to track the Speed, Accelerometer, Temperature

and Vehicle Power while the DVR is recording video. This information becomes improtant as a

blackbox data for accidents. In the expanded chart view Speed, Accelerometer, Temperature and

Vehicle Power, In the Tabbed Chart mode there are three tabs: Speed, Accelerometer, and

Diagnosis. Diagnosis displays Temperature and Vehicle Power. BUS-WATCH® Video Info

Analysis provides a ruuning chart of the data as it pertains to the video.

1 2 ... 42 43 44 45 46 47 48 49 50 51 52 ... 98 99

Sin comentarios

Radio Engineering Industries SD40 Manual de usuario Pagina 47