Radio Engineering Industries SD40 Manual de usuario descargar pdf (Pagina 66)

Digital BUS-WATCH

HDx00

Page 66 of 85

Radio Engineering Industries, Inc.

640430 -- Rev 0 -- 1/12/2012

Speedometer Source: the source that the DVR is reading speed from including

GPS, Speedo, and J1939.

Speed Unit: DVR supports MPH and KPH speed units.

Calibration Mode: when Speedometer Source is set to Speedo, Calibration Mode

option becomes available. When set to Quick, DVR displays a Calibrate Now

button to calibrate the speedometer reading. To calibrate the vehicle speed sensor,

set the target speed and drive the vehicle at the same speed as the target speed,

press Calibrate Now to calibrate the vehicle speed sensor. When set to Manual,

user can set Speed and P/S manually without actually driving the vehicle.

Speed Sensitivity: how fast the speedometer reading gets updated.

High-speed Alarm: when select On, if speedometer reading is higher than

threshold value, DVR records video as high-speed alarm.

Input Setup

Figure 54: Input Setup - Preset

The Input Setup shows all the available inputs on the DVR. Each signal can be

renamed, adjusted to active high/low, and set to trigger alarms when activated. There are

1 2 ... 61 62 63 64 65 66 67 68 69 70 71 ... 84 85

Sin comentarios

Radio Engineering Industries SD40 Manual de usuario Pagina 66