Radio Engineering Industries Digital BUS-WATCH R4001 Manual Pagina 42

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 75
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 41
Digital BUS-WATCH
®
PC Software Manual
Radio Engineering Industries, Inc.
640372 - Rev C - 11/10/2009
Page 42 of 75
Network Setup
Setup
The Setup functions of the Digital BUS-WATCH® surveillance system are available
from the Setup dialog box.
The Setup dialog box is accessed by clicking the Setup Button at the bottom of the BUS-
WATCH® Live view application interface or the BUS-WATCH® Play back application.
On the BUS-WATCH® Live view application
On the BUS-WATCH® Play back application
Setup Button
The available setup functions of the Setup dialog box are organized into tabs at the top of
the dialog box. Each tab provides access to setup functions associated with specific
operations or functions of the Digital BUS-WATCH® surveillance system. A
description of the setup function(s) of each tab are described below.
Devices tab
The Devices Setup is used to configure the BUS-WATCH® Live View application and
BUS-WATCH® Play back application to connect to Rx001Mobile Digital Video
Recorders (DVR) through a network. Every DVR to which the BUS-WATCH® Live
View application or BUS-WATCH® Play back application will connect must have an
entry created in Devices Setup of the Digital BUS-WATCH® surveillance system.
Each DVR entry in Devices Setup includes information required by the BUS-WATCH®
Live View application or BUS-WATCH® Play back application to connect to a remote
DVR through a network, including the DVR network address, type, and number of
channels.
For the Digital BUS-WATCH® surveillance system, DVR entries created using the
Devices Setup function are used to connect to network connected DVRs, and assign
channels from the referenced DVRs to viewing windows in the Digital BUS-WATCH®
surveillance system. DVR entries created using Device Setup are available under the
Device Setup tab, located in the center of the Setup window application interface.
Vista de pagina 41
1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 74 75

Comentarios a estos manuales

Sin comentarios