Radio Engineering Industries Digital BUS-WATCH R4001 Manual descargar pdf (Pagina 25)

Digital BUS-WATCH

PC Software Manual

Radio Engineering Industries, Inc.

640372 - Rev C - 11/10/2009

Page 25 of 75

during live view mode. Please see the section titled DVR Remote Management System

in this manual for more information on using the DVR Remote Management System

application and Video Capture function.

To view captured video stored on the host PC, set the video source for the BUS-

WATCH® Play back application to the Live View application captured video by clicking

the Captured source button.

The DVR Remote Management System application Video Recording function records

video to a standard directory on the host PC. The BUS-WATCH® Play back application

searches the standard directory to determine available video.

Dates with available video in the standard directory, from any DVR and/or camera, will

be highlighted on the calendar display in the upper left corner of the screen. Use the

arrows on top of the calendar to page to the desired month and year. Select a date with

available video by clicking on a highlighted day in the calendar display.

To display available video segments for the selected date, the specific DVR and channel

(camera) number are selected using the DVR Name and Channel selection boxes located

directly under the calendar on the left side of the interface.

DVR Name, Channel Selection Boxes

The DVR Name selection box acts as a filter to show only video segments from the

specified DVR. The DVR Name selection box displays the names of all DVRs for which

recorded video is available. Click the arrow on the right side of the selection box to

display a list of DVRs for which captured video is available, and select a DVR from the

list. Note: If the target DVR is not in the list, no captured video is available for that

device in the standard directory on the host PC.

The Channel selection box acts as a filter to show only video segments from a single

camera on the DVR previously selected using the DVR Name selection box. The DVR

Remote Management System application Video Capture can capture video from only one

camera at a time, so video segments within a given time are available only for a single

camera. Click the arrow on the right side of the selection box to select the desired camera.

If captured video is available, a list of video segments will appear in the video segment

list to the left of the screen. If no video segments appear in the video segment list, no

captured video from the specified DVR and camera number on the selected date exists in

the standard directory on the host PC.

Video segments in the video segment list can be placed on the play list for playback.

Please see the sections titled Date/Time Selection and Playback Control for more

information on selecting and viewing video.

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 74 75

Sin comentarios

Radio Engineering Industries Digital BUS-WATCH R4001 Manual Pagina 25