Radio Engineering Industries Digital BUS-WATCH Manual de usuario Pagina 6

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 30
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 5
Digital BUS-WATCH
®
6
Radio Engineering Industries, Inc.
640289
Rev B -- 11/18/2002
System Start-Up
To start the recording process, place the system switch in the ON position (this will
be done automatically if the system switch is connected to the ignition switch and
the ignition switch is in the ON position). Upon turning the system switch ON, the
Digital BUS-WATCH® will commence recording.
To stop the recording process, place the system switch in the OFF position. If the
OFF DELAY option is enabled, the Digital BUS-WATCH® will continue to record
for the prescribed number of minutes. When the off-delay expires, the camera and
Digital BUS-WATCH® shut off.
Automatic Hard Drive Heater
In order to prevent the possibility of hard-drive damage during cold periods, the
Digital BUS-WATCH® is equipped with a temperature sensor. The heater is
activated when the temperature at or below 40° F and the Digital BUS-WATCH®
is turned on via system switch or timer. This is indicated by the red LED labeled
HEATER on the front panel. The colder the temperature, the longer the heater
remains on, with a maximum of ten minutes at the coldest temperatures. During
this time all Digital BUS-WATCH® functions are inhibited and the camera remains
unpowered. When the unit has completed its heating cycle, it will power up and
operate normally.
Digital BUS-WATCH Security Cabinet
The Digital BUS-WATCH® security cabinet can be mounted in any orientation
under a seat, in a parcel rack, on the floor, to a wall, etc. It should not present a
trip hazard or head impact hazard, nor should it interfere with the seating, safety
or comfort of the passengers.
Long Term Storage
If the Digital BUS-WATCH® system is installed but not used for an extended
period of time (longer than 2 weeks) it is recommended that the main power toggle
on the front panel be set in the OFF position.
Vista de pagina 5
1 2 3 4 5 6 7 8 9 10 11 ... 29 30

Comentarios a estos manuales

Sin comentarios